Telephone: (860) 291-8177

 Fax: 860-282-2441

 Email: info@whitneyglazingsupply.com

Store Hours:
Monday thru Friday: 7:30am - 5:30pm
Saturday: 9:00am-12:00pm

Map & Directions

Contact Us

Quotes to remember

"A WISE AND FRUGAL GOVERNMENT, SHALL LEAVE MEN FREE TO REGULATE THEIR OWN PURSUITS OF INDUSTRY AND IMPROVEMENT, AND SHALL NOT TAKE FROM THE MOUTH OF LABOR THE BREAD IT HAS EARNED - THIS IS THE SUM OF GOOD GOVERNMENT."

Thomas Jefferson

"ANY SUPERVISOR WORTH HIS SALT WOULD RATHER DEAL WITH PEOPLE WHO ATTEMPT TOO MUCH, THAN THOSE WHO TRY TOO LITTLE."

Lee Iacocca

"LEADERSHIP IS A POTENT COMBINATION OF STRATEGY AND CHARACTER, BUT IF YOU MUST BE WITHOUT ONE, BE WITHOUT THE STRATEGY"

Norman Schwarzkopf, Jr.

"THE WORLD IS MOVED NOT ONLY BY THE MIGHTY SHOVES OF ITS HEROES, BUT ALSO BY THE AGGREGATE OF TINY PUSHES BY EACH HONEST WORKER."

Helen Keller

Read More

Equalizer Moulding Tools and Clips Products:

We found 32 products

Equalizer HeatWave 120-Volt Heat Gun

Perfect for reshaping mouldings, drying pinchwelds, or warming glass and pinchwelds. This compact, lightweight, easy to use heat gun is perfect for dozens of shop uses. With temperature settings of 570° F and 1050° F (more ...)

Equalizer Heavy-Duty Heat Gun

Professional, heavy-duty, industrial and professional quality heat gun will heat up to 1000° Fahrenheit and has a huge air flow of 23 cubic feet per minute. The perfect tool for those rainy/snowy days when you really (more ...)

Equalizer Moulding Release Tool

Slide the tool left or right under the moulding until it hooks a retaining clip. Rock the tool with a twist of the wrist to pull the clip out slightly. This releases the moulding from the clip. Heat treated, high carbon steel (more ...)

Equalizer MouldingMaker Adhesive

If you are making mouldings that are mitered together at the corners, or mouldings that go all the way around a glass and join together at the bottom, then you need an adhesive that will permanently hold the moulding together (more ...)

Equalizer U-Groove Cut Out Knife - With Pull Handle

Cuts a groove for Christmas tree mouldings. Many technicians use the short cut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree moulding is removed i (more ...)

Equalizer U-Groove Cut Out Knife - Without Pull Handle

Cuts a groove for Christmas tree mouldings. Many technicians use the short cut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree moulding is removed i (more ...)

Equalizer Christmas Tree Moulding Remover

Without the right tools, Christmas tree mouldings are often difficult to remove. Sometimes, you can not find a place to start prying them up. Flat screwdrivers do not always fit under them because the mouldings lie tight agai (more ...)

Equalizer Standard Moulding Maker

This tool works great for cutting mouldings to size but also works perfect for cutting our StopGun™ Stops. When you use MegaRaptor™ to cut stops be sure to put the stop close to the back (see p (more ...)

Equalizer Double Direction Moulding Release Tool

One challenging thing about being an auto glass technician is never knowing what the next job will bring. You might be working on a state-of-the-art vehicle one hour and a few minutes later be working on a vehicle that is 30 (more ...)

Equalizer Underside Moulding Installer

To use the Underside Moulding Installer, push the moulding through the handle as shown (Fig. A) and then roll it along the edge of the glass (Fig. B), pushing downward (to set the adhesive) and inward against the edge of the (more ...)

Equalizer MouldingMaker

MAKE YOUR OWN MOULDINGS...Many vehicles still use mouldings that have "square" corners. Now you can make your own mouldings. Place your universal moulding on the lower jaw of the moulding cutters and squeeze the handle. A sha (more ...)

Equalizer Double End Moulding Release Tool

This type of moulding release tool has been around the industry for years. We have put it in our catalog because so many people asked us to carry them. Our clip removal tool is made of steel so it will not bend. It has a smal (more ...)

Equalizer Moulding Hold Down Tool

The corners on today’s mouldings will often raise up and leave an unsightly gap under them. Taping these mouldings down can be disastrous because the tape will sometimes attack the paint and, in the worst case, remove i (more ...)

Equalizer Honda/Acura Clip Removal Tool

Honda/Acura clips can be very difficult to remove. The problem is you cannot push in on one part of the clip and remove it, you must push in on both prongs of the clip at the same time. Honda/Acura makes so many different sty (more ...)

Equalizer A-Pillar Release Tool

A simple pull and push with the A-Pillar Release Tool around the clip will release each side of the arrow style clip legs from the vehicle. Works better than a door panel tool or flat headed screw driver that many techs try t (more ...)

Equalizer Ford F-150 2004 (and up) Pickup Clip Remover

Also works on Nissan Maxima and many others. The trend in recent years is to create a clip that can be pushed down to different levels and lock in place. This corrects any uneven fit between the moulding and the glass. It wor (more ...)

Equalizer ClipFork Clip Remover

Honda and Acura vehicles have some of the most annoying clips to remove. The step clip used on most of their vehicles has 4 individual locking tabs on each side and they are staggered so a locking tab will catch as you push t (more ...)

Cowling Clip Removal Tool

Removes expansion fasteners quickly and without damage.If expansion-type cowling clips worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work (more ...)

Equalizer Recessed Cowling Clip Remover

Some self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX® screw, but are the type that can be removed with a tool like the TPE657. The only problem is the (more ...)

Equalizer Clip Removal Tool

There are many small clips you must remove when working with automobile glass. Many cowlings and drip gaskets around the cowlings are held on by these small clips. It is difficult to find a tool that will go under the head of (more ...)

Equalizer Windshield Wiper Removal Tool

This tool makes wiper arm removal fast and easy. Simply place the hook under the arm base, squeeze the wiper arm and tool handle together, and lift the wiper arm right off. Made in USA.

Equalizer Clip Removal Tool

Many of today’s vehicles have clips that are located deep under the panel. To remove these clips you need a flat tool that will reach under the panel without prying it up. Our BT590 will reach a full 4" under the panel (more ...)

Equalizer Door Upholstery Remover

Removes and saves all types of clips.any clips fit tightly into the hole and against the surface of the vehicle. Our clip saver removes, without damage, all types of clips. The front of the tool is tapered so it will fit easi (more ...)

Equalizer Window and Door Clip Remover

Works on GM, Ford and most common C-clips. Flared sides prevent the metal from damaging the door panel. Unique back-end firmly holds the clip for easy installation of the C-clip back into the handle. Made in the USA. (more ...)

Equalizer Compact C-Clip Remover

C-clip removers are an item that every technician has in his toolbox, but those C-clip removers will not always fit into the tight spots and compound curves on today’s vehicles. Some of the most common vehicles on the r (more ...)

Equalizer Door Upholstery Remover

For plastic fasteners. place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up. A rugged tool that will last a lifetime. Large, comfortable handle. (more ...)

Equalizer Curved Door Upholstery Remover

For removing plastic fasteners in confined places.his is the same upholstery remover as the one shown above, but it is intended for use on the front part of the door where the door jam will often interfere with the removal of (more ...)

Equalizer Door Panel Removal Tool

Originally, these types of tools were made using a metal that was not very hard and could easily be bent. For this reason, we redesigned it using a much harder metal than the original. Bending is no longer a problem. Made of (more ...)

Equalizer Springer Clip Removal Tool

The distinct precision curvature of the Springer Clip Removal Tool provides a variable load distribution, safely moving the load point along the tool as more leverage is applied. The tapered tip allows entry under closely fit (more ...)

Equalizer Door Panel Clip Removal Tool

Sometimes clips are so far back from the edge of a vehicle door that prying them up can be a challenge. With our Door Panel Clip Removal Tool’s twist-and-remove design, these encounters will no longer slow you down. Jus (more ...)

Equalizer Clip-Zip Clip Removal Tool

This tool makes the frustrating job of clip removal simple! Remove door panel clips and interior moulding clips with ease. Simply slide the jaws of the tool under the head of the clip and squeeze down on the handle. The outsi (more ...)

Equalizer Products

For a complete listing of all Equalizer products, go to www.equalizer.com.