Equalizer ClipFork Clip Remover

Honda and Acura vehicles have some of the most annoying clips to remove. The step clip used on most of their vehicles has 4 individual locking tabs on each side and they are staggered so a locking tab will catch as you push the moulding into place. Push the molding down a little further and the next tab will catch. This is how Honda and Acura achieve that perfect fit, with an adjustable clip. This works great for them, but it is a nightmare for the technician. To remove this clip you must push in on one tab (on each side), pull the clip up about 1/16”, then the next set of tabs will catch and you must then push in on that set. Sometimes you must do this 4 times on each side just to remove one clip. Our ClipFork™ solves this problem by pushing down on all the tabs at the same time. When the ClipFork™ is inserted into the clip opening it pulls all of the locking tabs up past the retaining catch. Made of super tough 1/4” polycarbonate and thinned down to 1/8” to fit inside the clip release opening.