Equalizer Moulding Tools and Clips
Equalizer Moulding Tools and Clips
-
Equalizer Clip Removal Tool
Add to cartThere are many small clips you must remove when working with automobile glass. Many cowlings and drip gaskets around the cowlings are held on by these small clips. It is difficult to find a tool that will go under the head of these clips.
-
Equalizer Clip Removal Tool
Add to cartMany of today’s vehicles have clips that are located deep under the panel. To remove these clips you need a flat tool that will reach under the panel without prying it up. Our BT590 will reach a full 4″ under the panel to remove the deepest clips.
-
Equalizer Clip-Zip Clip Removal Tool
Add to cartThis tool makes the frustrating job of clip removal simple! Remove door panel clips and interior moulding clips with ease. Simply slide the jaws of the tool under the head of the clip and squeeze down on the handle. The outside portion lies against the body while the inside portion grabs the clip firmly so it can be lifted up without damaging the cardboard or plastic panel. Made in the USA.
-
Equalizer ClipFork Clip Remover
Add to cartHonda and Acura vehicles have some of the most annoying clips to remove. The step clip used on most of their vehicles has 4 individual locking tabs on each side and they are staggered so a locking tab will catch as you push the moulding into place. Push the molding down a little further and the next tab will catch.
-
Equalizer Compact C-Clip Remover
Add to cartC-clip removers are an item that every technician has in his toolbox, but those C-clip removers will not always fit into the tight spots and compound curves on today’s vehicles.
-
Equalizer Ford F-150 2004 (and up) Pickup Clip Remover
Add to cartAlso works on Nissan Maxima and many others. The trend in recent years is to create a clip that can be pushed down to different levels and lock in place. This corrects any uneven fit between the moulding and the glass.
-
Equalizer HeatWave 120-Volt Heat Gun
Select options This product has multiple variants. The options may be chosen on the product pagePerfect for reshaping mouldings, drying pinchwelds, or warming glass and pinchwelds. This compact, lightweight, easy to use heat gun is perfect for dozens of shop uses.
-
Equalizer Heavy-Duty Heat Gun
Select options This product has multiple variants. The options may be chosen on the product pageProfessional, heavy-duty, industrial and professional quality heat gun will heat up to 1000° Fahrenheit and has a huge air flow of 23 cubic feet per minute. The perfect tool for those rainy/snowy days when you really need to dry out the area around a windshield or back glass, or heat those mouldings.
-
Equalizer Honda/Acura Clip Removal Tool
Add to cartHonda/Acura clips can be very difficult to remove. The problem is you cannot push in on one part of the clip and remove it, you must push in on both prongs of the clip at the same time. Honda/Acura makes so many different style clips that a clip tool which will work on one vehicle will not necessarily work on another vehicle.
-
Equalizer Moulding Hold Down Tool
Add to cartThe corners on today’s mouldings will often raise up and leave an unsightly gap under them. Taping these mouldings down can be disastrous because the tape will sometimes attack the paint and, in the worst case, remove it. Our moulding hold down tool is attached with a vacuum.
-
Equalizer Moulding Release Tool
Select options This product has multiple variants. The options may be chosen on the product pageSlide the tool left or right under the moulding until it hooks a retaining clip. Rock the tool with a twist of the wrist to pull the clip out slightly. This releases the moulding from the clip. Heat treated, high carbon steel.
-
Equalizer MouldingMaker
Add to cartMAKE YOUR OWN MOULDINGS…Many vehicles still use mouldings that have “square” corners. Now you can make your own mouldings. Place your universal moulding on the lower jaw of the moulding cutters and squeeze the handle. A sharp utility knife blade cuts the moulding straight, smooth and at the proper angle.
-
Equalizer MouldingMaker Adhesive
Select options This product has multiple variants. The options may be chosen on the product pageIf you are making mouldings that are mitered together at the corners, or mouldings that go all the way around a glass and join together at the bottom, then you need an adhesive that will permanently hold the moulding together. Equalizer® MouldingMaker™ adhesive is a permanent. colorless adhesive that is specially formulated to join mouldings.
-
Equalizer Recessed Cowling Clip Remover
Add to cartSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX® screw, but are the type that can be removed with a tool like the TPE657. The only problem is the TPE657 will not reach down into the recessed area and go under the head of the clip.
-
Equalizer Springer Clip Removal Tool
Add to cartThe distinct precision curvature of the Springer Clip Removal Tool provides a variable load distribution, safely moving the load point along the tool as more leverage is applied. The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter whether you are an auto glass shop or a body shop you will be amazed at all its uses.
-
Equalizer Standard Moulding Maker
Add to cartThis tool works great for cutting mouldings to size but also works perfect for cutting our StopGun™ Stops. When you use MegaRaptor™ to cut stops be sure to put the stop close to the back (see picture). This will give you enough leverage to make a clean cut.
-
Equalizer U-Groove Cut Out Knife – With Pull Handle
Select options This product has multiple variants. The options may be chosen on the product pageCuts a groove for Christmas tree mouldings. Many technicians use the short cut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree moulding is removed it is impossible to press it back into place.
-
Equalizer U-Groove Cut Out Knife – Without Pull Handle
Add to cartCuts a groove for Christmas tree mouldings. Many technicians use the short cut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree moulding is removed it is impossible to press it back into place.
-
Equalizer Underside Moulding Installer
Add to cartTo use the Underside Moulding Installer, push the moulding through the handle as shown (Fig. A) and then roll it along the edge of the glass (Fig. B), pushing downward (to set the adhesive) and inward against the edge of the glass (to keep the moulding a consistent distance from the outside edge). It is made of a heavy-duty plastic material and will give you years of carefree service.
-
Equalizer Window and Door Clip Remover
Add to cartWorks on GM, Ford and most common C-clips. Flared sides prevent the metal from damaging the door panel. Unique back-end firmly holds the clip for easy installation of the C-clip back into the handle. Made in the USA.
-
Equalizer Windshield Wiper Removal Tool
Add to cartThis tool makes wiper arm removal fast and easy. Simply place the hook under the arm base, squeeze the wiper arm and tool handle together, and lift the wiper arm right off. Made in USA.
-
Equalizer Products
Buy product
